|
ASME B16.1 |
Cast Iron Pipe Flanges and Flanged Fittings Design and material requirements and pressure and temperature ratings for pressure classes 25, 125, and 250. Primary Materials ASTM Spec A126 Classes A or B (Pressure class dependent) |
|
ASME B16.5 |
Pipe Flanges and Flanged Fittings Design and material requirements and pressure and temperature ratings for flanged fittings for classes 150 through 2500 exclusive Primary Materials Similar to ASME B16.34 above, specific materials are listed in the standard. |
|
ASME B16.10 |
Face-to-Face and End-to-End Dimensions of Valves Establishes the end-to-end length (or center to face dimensions of angled valves) or weld end and flanged valves. |
|
ASME B16.11 |
Forged Fittings, Socket Weld and Threaded Establishes the design requirements for classes 2000, 3000 & 6000 for threaded fittings, and classes 3000, 6000 and 9,000 socket welding type fittings. |
|
ASME B16.24 |
Cast Copper Alloy Pipe Flanges and Flanged Fittings Design and material requirements and pressure and temperature ratings for flanges and flanged fit- tings for classes 150 through 2500 inclusive. Primary Materials ASTM B61 and B62, ASTM B148 Alloy C95200 |
|
ASME B16.25 |
Butt-welding Ends Establishes the detail requirements for butt-welding ends for valves in various pressure classes end configurations. |
|
ASME B16.33 |
Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psi Valve design requirements for 1/2” through 2” for outdoor installation as primary shut off before the meter and regulator. |
|
ASME B16.34 |
Valves- Flanged, Threaded and Welded End Valve design requirements, minimum wall thicknesses, allowable materials, and pressure and tempera- ture ratings in standard and special class, all pressure classes from 150 to 4500. Primary Materials This standard allows many different materials, from carbon steel through many nickel and other alloys, consult standard for particulars |
Back to Table of Contents